Anycubic Kobra 3 Combo 3D Printer

Where to buy

Amazon →

ProductIndex may earn a commission from qualifying purchases made through links on this site.

Price$355 at Anycubic, checked Nov 16, 2026 · Reviews referenced800 · UpdatedOctober 20, 2026

One-line verdict

The Anycubic Kobra 3 Combo delivers fast multi-color FDM printing at a budget price but trades some reliability and software polish for the low cost compared to Bambu Lab alternatives.

How it compares

  • vs FLASHFORGE AD5X ($300–$400): Kobra 3 Combo wins on multi-color system maturity and print speed; AD5X wins on setup simplicity and price floor
  • vs Flashforge AD5M Pro ($350–$420): Kobra 3 Combo wins on multi-color capability and value; AD5M Pro wins on nozzle-swap speed and single-material reliability
  • vs AnkerMake M5C ($350–$450): Kobra 3 Combo wins on multi-color printing and price; AnkerMake M5C wins on single-color speed and build feel
  • vs ELEGOO Centauri Carbon ($340–$400): Kobra 3 Combo wins on multi-color output and build volume; Centauri Carbon wins on enclosed-frame material versatility
  • vs Elegoo Neptune 4 Plus ($320–$380): Kobra 3 Combo wins on multi-color capability and speed; Neptune 4 Plus wins on build volume and price

AI-summarized review themes

Frequently Praised

  • High print speeds up to 600 mm/s with real-world Benchy times around 11-21 minutes
  • Affordable entry to 4-color printing via ACE Pro system with drying function
  • Easy setup and auto-leveling for quick first prints right out of the box
  • Good single-color quality with clean surfaces and solid overhangs at moderate speeds
  • Value for money as a second printer upgrade for hobbyists and educators
  • PEI bed provides reliable adhesion for PLA and similar filaments

Frequently Criticized

  • Noticeable purge waste and longer color-change times in multi-color mode
  • Mixed reliability with occasional clogs, adhesion issues, or ACE Pro failures after months of use
  • Noisier operation than enclosed competitors, especially during high-speed prints
  • Slicer software requires tuning and has fewer features than premium options
  • Some units need bed tweaks or firmware updates for consistent performance

Best for

Multi-color hobby prints, functional parts, educators and prosumers on a budget, second-printer upgrades

Not for

Production runs needing high reliability, users prioritizing minimal waste or quiet operation, those wanting fully enclosed high-temp materials out of the box

Data sources

  • Estimated ~800 purchase reviews via Amazon, Reddit, and retailer sites
  • Review period: 2024–2026
  • Sentiment confidence: medium

Specifications

Technology Type FDM
Print Speed Max 600 mm/s (real-world often 200-300 mm/s recommended)
Build Volume 250 × 250 × 260 mm
Multi-Color Capability 4 colors via ACE Pro (expandable to 8) with drying
Nozzle Temperature Up to 300°C
Heated Bed Temperature Up to 110°C
Enclosed vs Open Open frame
Ease of Use Features Auto bed leveling, auto Z-offset, flow calibration
Noise Level Noticeably loud during operation
Software Anycubic Slicer Next, compatible with OrcaSlicer/Cura
Also available as: Markdown · JSON-LD